Estella

Interior paint of a single layer

Excellent opacity: “one coat” paint
Snow- white, deep-matt coating
Reinforcing fibers
EU Ecolabel

Download Technical Data Sheet

Description
Specifications
Information
Request SDS

Properties

Deep-matt acrylate water-borne paint for dry indoor walls and ceilings.

Excellent properties for indoor use: minimum content of hazardous substances and reduced content of volatile organic compounds (VOC), maximum permissible EU VOC content for the product (subcat a) - 30 g/L, maximum VOC content in the product <10 g/L
EU Ecolabel number EE/044/001. EU Ecolabel confirms that this product has the most environmentally friendly properties, the minimum concentration of hazardous substances and the content of volatile organic compounds is reduced. More information: http://ec.europa.eu/environment/ecolabel/
Provides a high level of opacity due to the modern technology which allows the titanium dioxide pigment to be replaced (the production of titanium dioxide is associated with high levels of harmful environmental emissions)
Easy applications without dripping or splatter; easy to level out
Economical. Recommended for quick interior renovation and for working on large objects
The coating does not crack when applied in a thick layer and covers hairline cracks well because of the special reinforcing fibers
Wash resistance class II in accordance with EN 13300
Almost odourless
The paint does not give off harmful substances into the air and has been classified as emission class M1
Dries fast
Can be tinted

Gloss:

Deep-matt in accordance with EN 13300
group 6 in accordance with RYL 2012

Wash resistance:

class 2 in accordance with EN 13300
group 313 of painting regulations in accordance with RYL 2012

Opacity:

class 1 in accordance with EN 13300

Purpose

Painting walls and ceilings in dry residential and office spaces (children’s playrooms, rooms in childcare facilities, studies, living-rooms, bedrooms, offices, reception and meeting halls, hotels, hospitals, nursing homes, department stores, restaurants, public institutions etc.). Ideal for painting large areas. Not suitable for painting floors, doors and furniture.

Types of surfaces for painting

Surfaces previously painted with latex, alkyd or oil-base paints or new surfaces made of concrete, aerated concrete, gypsum board; brick; surfaces finished with putty or plastered and surfaces covered with glass fibre wallpaper or other rolled finishing materials. For interior use.

Quality standards

EN 13300 [Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification] – classification standards of coverage, gloss level and wet abrasion resistance parameters for water-borne coating materials for interior walls and ceilings.
RYL – construction quality standard for finishing commonly followed in the EU area; describes coating materials, using generally accepted standards, for proper quality assurance in construction.
VOC (volatile organic compounds) – content in accordance with the European Union directive 2004/42/CE.
Product and service quality is guaranteed by the quality, environmental protection, occupational health and safety management system in accordance with standards ISO 9001:2015; ISO 14001:2015 and ISO 45001:2018.
EU Ecolabel – The EU Ecolabel is the official ecolabel of the European Union. Ecolabel is a voluntary label, assigned to products with a minimal environmental impact throughout their life cycle - from raw materials production, from use to disposal; testifies to the safety of products and attentive attitude of the manufacturer to the issues of environmental protection. Ecolabel allows products to be distinguished from other similar items that have a greater negative impact on the environment. An ecolabel is issued by an impartial institution to a product which corresponds to the ecological criteria of the ecolabel. More information: http://ec.europa.eu/environment/ecolabel/

Manual tinting

… Assortment of pastes

Machine tinting

Bases A pastel colours

…

Surface preparation before painting

The surface to be painted must be carefully cleaned from loose or peeling material, dirt, grease and dust. If mould removal is necessary, use Biotol E or Biotol Spray Sandpaper durable alkyd substrates until they are matt and remove the dust thoroughly. If the surface is very dirty, wash it with EasyClean. Use a putty from the FILLER line to fill cracks, holes and uneven areas. Sand the filled surface to make it even and remove sanding dust. Prime filled surfaces with Aquastop or Tiefgrund moisture barrier to reduce porosity. Follow the product instructions for use.

Application

Stir the paint thoroughly before application. Mixing tinted paint in one container is recommended. Apply with a roller or spray gun at the temperature between +10 °C and +25 °C and relative air humidity below 80%. Apply the paint evenly. Contrast substrates may require a second layer. When using a spray gun dilute the paint with water in the amount of 5% until it reaches working viscosity. Try to maintain a wet edge in the process of painting.

Care for the painted surface

The coating reaches its peak wash resistance in 3…4 weeks; treat the surface with care until its hardness and wash resistance have reached their peak levels. We recommend using water and neutral or mildly alkaline detergents (pH below 9) and a soft washcloth or microfiber cloth for cleaning. Do not use organic solvents, abrasive detergents or stiff brushes and rough sponges. Excessive rubbing may make the surface glossy. Wipe the surface dry after wet cleaning.

Tools

Roller, airless spray gun (nozzle: 0.017–0.021')'.

Tool cleaning

Wash with soap and water after completing work.

Colour	White
Tinting	Machine tinting according to the Eskarocolor system (base А).
Consumption	The coating reaches its peak wash resistance in 3…4 weeks; treat the surface with care until its hardness and wash resistance have reached their peak levels. We recommend using water and neutral or mildly alkaline detergents (pH below 9) and a soft washcloth or microfiber cloth for cleaning. Do not use organic solvents, abrasive detergents or stiff brushes and rough sponges. Excessive rubbing may make the surface glossy. Wipe the surface dry after wet cleaning.
Drying time	At the temperature of +20 °C and the relative humidity of 80%, the surface is ready for the application of another coat in 1…1,5 hours. The surface is fully dry in 12 hours.