Akrit 4

Deep matt wall and ceiling paint

Can be tinted into over 10,000 colours
Excellent opacity

Download Technical Data Sheet

Description
Specifications
Information
Request SDS

Properties

Acrylate water-borne paint providing maximum application comfort.

Excellent opacity
High decorative properties: smooth and totally matt coating
Stable gloss at different light angles, including sidelight
Wash resistance class II in accordance with EN 13300
The paint has been classified as emission class M1
Suitable for sensitive and allergic people

Maximum permissible VOC content for the product (subcat a): 30 g/L; maximum VOC content in the product: ≤ 15 g/L.

Gloss:

deep matt (approximately 4) in accordance with EN 13300
group 6 in accordance with RYL 2012

Wash resistance:

class 2 in accordance with EN 13300 (ISO 11998)
group 312, 212 of painting regulations in accordance with RYL 2012

Purpose

Painting ceilings and walls in rooms with regular performance requirements: bedrooms, living rooms, children’s rooms, offices etc.
Can be used as a primer under water-borne paints. For example: Akrit 7, Akrit 12, Akrit 20.
Is not suitable for application on floors, doors and furniture.

Types of surfaces

New or previously painted surfaces made of concrete, aerated concrete, gypsum board, primed wood chipboard or wood fibre board; brick, surfaces filled with putty and plastered and surfaces covered with glass fibre wallpaper or other paintable finishing materials.

Quality standards

EN 13300 [Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification] – classification standards of coverage, gloss level and wet abrasion resistance parameters for water-borne coating materials for interior walls and ceilings.
ISO 11 998 [Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings], ISO 2813 [Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees] – techniques for measuring gloss and wear resistance parameters.
RYL – construction quality standard for finishing commonly followed in the EU area; describes coating materials, using generally accepted standards, for proper quality assurance in construction.
VOC (volatile organic compounds) – content in accordance with the European Union directive 2004/42/CE.
Product and service quality is guaranteed by the quality, environmental protection, occupational health and safety management system in accordance with standards ISO 9001:2015; ISO 14001:2015 and ISO 45001:2018.
“Eesti Allergialiit tunnustab” (“Estonian Allergy and Asthma Federation recognizes”) is assigned to products that are safe, reliable, do not contain fragrance or generally irritating or sensitising substances and that help to reduce indoor air pollutant levels and are suitable for people with sensitive skin or suffering from allergic diseases.

Manual tinting

… Assortment of pastes

Machine tinting

Bases A pastel colours

…

Surface preparation before treatment

The surface to be painted must be carefully cleaned from peeling material, dirt and dust.I f mould removal is necessary, use Biotol E or Biotol Spray Sandpaper durable alkyd substrates until they are matt and remove the dust thoroughly. If the surface is very dirty, wash it with EasyClean. Use a putty from the FILLER line to fill cracks, holes and uneven areas. Sand the filled surface to make it even and remove sanding dust. Prime filled surfaces with Aquastop or Tiefgrund moisture barrier to reduce porosity.

Application

Stir the paint thoroughly before application. The paint can be diluted with water in the amount of up to 5% of its volume for the application of the first coat. Apply 2 coats with a roller or spray gun at the temperature between 10 °C and 25 °C and relative humidity not exceeding 80%.
In case the paint job is carried out in adverse conditions (draughts, the use of heating appliances, high temperature or low air humidity), we recommend using the Time+ slow-dry agent in the amount of up to 3% of the paint volume (mix 0.33 L of Time+ into 9.5 L of paint).

Care for the painted surface

Treat the surface with care for 4 weeks after painting until its hardness and wash resistance have reached their peak levels. We recommend using water and neutral or medium alkaline detergents (pH below 9).
Do not use organic solvents and hard scrubbing brushes or sponges. Wipe the surface dry after wet cleaning. Use Biotol E and Biotol Spray to remove mould. Use soft sponges and cloths for cleaning.
If necessary, the surface can be lightly wiped with a soft sponge or cloth approximately 48 hours after paint application.

Tools

Roller (pile length: 10-14 mm), airless spray gun (nozzle: 0.021–0.027'').

Tool cleaning

Wash with soap and water after completing work.

Colour	White
Tinting	Machine tinting according to the Eskarocolor system (base А).
Consumption	6-10 m²/L
Drying time	1–2 hours at 20°С and relative air humidity of 80%.

Safety precautions

The product is not classified as dangerous according to CLP Regulation (EC) nº 1272/2008. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Keep out of reach of children. Do not eat or drink during the process, washing hands afterwards with suitable cleaning products. In case of paint contact with eyes, wash the eyes with plenty of water. As a preventative measure it is recommended to use basic Personal Protection Equipment, with the corresponding <<CE marking>> in accordance with Directive 89/686/EC.

Waste treatment

Avoid release to the environment. Dispose of the contents/containers in accordance with the current legislation on waste treatment. Waste treatment methods: code 08 01 12- Waste paint and varnish other than those mentioned in 08 01 11, waste class (Regulation (EU) No 1357/2014): non-dangerous.

Volume / weight

0,95 L – 2,85 L – 9,5 L

Frost resistance	None
Density	1,4 kg/L
Storage conditions	Store and transport in intact containers at the temperature between +5°С and +30°С. Protect from exposure to freezing and direct sunlight.

Send us a message

Name

Company

Country

Phone

SDS

Request language

Update text

Enter code